Cryospring Cold Plunges
Barton DIY Cold Tub, Chiller-Ready
Barton DIY Cold Tub, Chiller-Ready
Couldn't load pickup availability
Share
Build a cold-water setup around a purpose-built tub. The Barton DIY Cold Tub is a rotomolded, insulated tub with a dedicated equipment housing, molded-in chiller ports, and filter-mounting inserts. It is designed for customers who want to supply their own compatible chiller, pump, and filtration equipment for an organized indoor or outdoor setup.
Why Customers Choose This Product
- Insulated rotomolded construction helps create a durable foundation for a cold-water setup.
- DIY format lets you choose compatible chiller, pump, and filtration equipment.
- Molded-in 3/4-inch NPT chiller ports support a clean equipment connection.
- A ventilated equipment housing with drip pan helps keep equipment organized.
- A garden hose drain valve and pre-pump strainer support straightforward maintenance.
- Hand-assembled in Minnesota and made in the USA.
Product Highlights
Rotomolded Tub
The tub is rotomolded and hand-assembled for a substantial, purpose-built enclosure. Its neutral Limestone White finish is approved for indoor and outdoor full-sun use.
Closed-Cell Insulation
Up to 4.5 inches of closed-cell insulation is built into the tub to support temperature retention during use.
Equipment Housing
The ventilated housing includes a drip pan and provides a dedicated area for compatible equipment. Review the internal housing dimensions before purchasing a chiller or other components.
Chiller and Filter Connections
Molded-in 3/4-inch NPT chiller in/out ports and filter-mounting inserts help keep a custom setup organized.
Lockable Lid
The lid includes a gasket and rust-resistant prop for a secure, insulated cover when the tub is not in use.
Drainage and Pre-Pump Strainer
The garden hose drain valve supports easier draining, while the pre-pump strainer helps protect the water circulation setup from larger debris.
Specifications
| Finish | Limestone White |
|---|---|
| Use | Indoor or outdoor, full-sun approved |
| Construction | Rotomolded tub, hand-assembled in Minnesota |
| Chiller ports | Molded-in 3/4-inch NPT in/out ports |
| Tub capacity | 150 gallons |
| Tub-only empty weight | 160 lb |
| Shipped weight | 223 lb |
| Total exterior length | 86.75 in |
| Total exterior width | 33.5 in |
| Total exterior height | 35.5 in |
| Internal tub length | 53.25 in |
| Internal tub width | 26 in |
| Internal tub depth | 27.25 in |
| Drip pan length | 27 in |
| Drip pan width | 22 in |
| Equipment housing height | 24 in |
Ideal For
- Customers building a custom cold-water setup.
- Indoor or outdoor spaces with room for an 86.75-inch tub and equipment housing.
- Shoppers who already have, or plan to source, compatible chiller, pump, and filtration equipment.
- Projects where organized connections and accessible drainage are important.
Important Information
- Equipment not included: This tub-only model does not include a chiller, water pump, filtration system, hoses, or other circulation equipment.
- Check fitment: Verify that your selected equipment fits within the equipment housing dimensions before ordering. Housing dimensions are 27 inches long by 22 inches wide by 24 inches high.
- Installation: Use compatible components and follow the installation and operating instructions supplied with each component. Electrical equipment must be installed and used according to applicable local requirements.
- Placement: Install on a stable, level surface that can support the filled tub, occupants, and equipment. Plan for drainage and access around the tub.
- Water care: Use a suitable water-care routine and follow the instructions for your filtration and sanitation equipment.
- Safe use: Follow responsible cold-water practices, use the lid when the tub is not in use, and keep the area supervised around children and pets.
Frequently Asked Questions
What is included with the Barton DIY Cold Tub?
The product includes the insulated tub, equipment housing with drip pan, lockable lid with gasket and rust-resistant prop, molded-in 3/4-inch NPT chiller ports, filter-mounting inserts, garden hose drain valve, and pre-pump strainer. A chiller, pump, filtration system, hoses, and other circulation equipment are not included.
What equipment do I need to complete the setup?
You will need compatible cold-water equipment, such as a chiller or chiller system, water pump, filtration system, connecting hoses, and any required electrical or plumbing accessories. Confirm compatibility and housing fitment before installation.
Can the Barton DIY Cold Tub be used outdoors?
Yes. The Limestone White finish is approved for indoor and outdoor full-sun use. Choose a stable, level installation area with suitable drainage and enough clearance for access to the tub and equipment housing.
How much space does the tub require?
The total exterior dimensions with equipment housing are 86.75 inches long by 33.5 inches wide by 35.5 inches high. Leave additional working clearance around the tub for installation, maintenance, and safe access.
What is the tub capacity?
The tub capacity is 150 gallons. Actual fill level may vary based on water level, occupants, and the equipment used with the setup.
If you want a durable, organized foundation for a custom cold-water setup, the Barton DIY Cold Tub gives you a chiller-ready enclosure with the space and connection points to plan your system around.
This product is not medical equipment and is not intended to diagnose, treat, cure, or prevent any disease. Consult a qualified healthcare professional before beginning cold-water exposure, especially if you have a medical condition or health concern.