The EXESAS 120 LED red light therapy panel delivers four wavelengths — 630nm, 660nm, 810nm, and 850nm — through 120 dual-chip 42mil LEDs at 5W each, for a power class of 600W and an actual power consumption of 175W. Red and infrared channels can be operated independently or simultaneously. The panel is rated at over 198mW/cm² irradiance with no EMF output and a 30° beam angle. A notable feature of this model is its linkable design: two or more panels can be connected together to expand coverage area and combined output. The package includes a door mount, adjustable hanging kit, buckle, protective eyewear, built-in timer, LCD control panel, and integrated cooling fans. A 2-year warranty is included.
Why Customers Choose This Product
- 120 dual-chip 42mil LEDs at 5W each — 600W power class, 175W actual consumption
- Four wavelengths: 630nm, 660nm (red) + 810nm, 850nm (near infrared)
- Red and infrared channels operable independently or simultaneously
- High irradiance: over 198mW/cm²
- No EMF output
- 30° beam angle, no flicker
- Meanwell LED drivers — used in professional-grade medical equipment
- Linkable design — two or more panels can be connected to expand coverage area
- Mounts vertically or horizontally to a TV stand via rear mounting holes
- Door mount and adjustable hanging kit included
- Built-in timer, LCD control panel, and integrated cooling fans
- Protective eyewear included
- 2-year warranty
Product Highlights
Four Wavelengths: 630nm, 660nm, 810nm & 850nm
The panel emits two visible red wavelengths (630nm and 660nm) and two near infrared wavelengths (810nm and 850nm). Red and infrared channels can be activated independently or together, giving you control over which wavelengths are active during each session.
120 Dual-Chip 42mil LEDs
Each of the 120 LEDs uses a dual-chip 42mil configuration at 5W per LED. The 42mil chip size is larger than the 35–38mil single-chip LEDs used in many competing panels, contributing to higher irradiance output. The dual-chip design means each LED emits across two wavelengths simultaneously.
600W Power Class / 175W Actual Consumption
The 600W power class reflects the combined rated output of all 120 LEDs at 5W each. Actual power consumption during operation is 175W — the figure relevant for assessing your outlet and circuit requirements. This is a notably low actual draw for a panel of this irradiance rating.
Linkable Panel Design
Two or more EXESAS panels of this model can be connected together to expand the total coverage area and combined output. This makes it possible to start with a single panel and scale up incrementally without replacing the unit.
Meanwell LED Drivers
Meanwell drivers are used in professional-grade medical equipment and are specified here for consistent, stable power delivery to the LEDs — a notable component upgrade compared to unbranded drivers used in many lower-cost panels.
High Irradiance: Over 198mW/cm², No EMF
The panel is rated at over 198mW/cm² irradiance with no EMF output during operation. The 30° beam angle focuses light output toward the treatment area rather than dispersing it broadly.
Flexible Mounting Options
Rear mounting holes allow the panel to be attached vertically or horizontally to a compatible TV stand. A door mount and adjustable hanging kit are also included for alternative placement configurations without additional hardware.
Built-In Timer, LCD Panel & Cooling Fans
The integrated timer and LCD control panel allow you to set and monitor session parameters directly on the device. Built-in cooling fans manage heat dissipation during operation to maintain consistent performance.
Specifications
| Brand | EXESAS |
|---|---|
| SKU | EXESAS-005 |
| LED Count | 120 Dual-Chip LEDs |
| LED Chip Size | 42mil Dual-Chip |
| Power per LED | 5W |
| Power Class | 600W |
| Actual Power Consumption | 175W |
| Wavelengths | 630nm, 660nm (Red) + 810nm, 850nm (Near Infrared) |
| Channel Control | Red and Infrared Independently or Simultaneously |
| Irradiance | Over 198mW/cm² |
| Beam Angle | 30° |
| EMF | No EMF |
| Flicker | No Flicker |
| LED Drivers | Meanwell (Professional-Grade) |
| Controls | Built-In Timer + LCD Control Panel |
| Cooling | Built-In Cooling Fans |
| Panel Dimensions | 24.5" × 8.25" × 2.5" (approx. 25" × 8.5" × 2.6") |
| Device Weight | Approx. 15 lbs |
| Linkable | Yes — Two or More Panels Can Be Connected |
| Mounting Options | TV Stand (Vertical or Horizontal via Rear Holes), Door Mount, Adjustable Hanging Kit |
| Country of Origin | United States |
| HS Code | 854370 |
| Included Accessories | Door Mount, Adjustable Hanging Kit, Buckle, Protective Eyewear, User Manual |
| Warranty | 2 Years |
| UPC | 196852798742 |
Ideal For
- At-home red and near infrared light therapy with four-wavelength coverage in a mid-size panel
- Users who want to start with one panel and expand coverage by linking additional units later
- Those who prioritize high irradiance and no EMF with a low actual power draw (175W)
- Flexible home setups requiring TV stand, door-mounted, or hanging configurations
- Users who want independent red and infrared channel control without a separate remote
Important Information
- Do not look directly into the LED panels during operation. Protective eyewear is included in the package and should be worn during all sessions. The 810nm and 850nm near infrared wavelengths are largely invisible to the naked eye.
- Near infrared light (810nm, 850nm) is largely invisible to the naked eye. Do not assume the device is off or inactive based on visible light output alone.
- When mounting to a TV stand, verify that the stand is rated to support the panel’s weight and that the mounting hardware is fully secured before use.
- When using the door mount or hanging kit, verify that the mounting surface and hardware can safely support the panel’s weight before use.
- When linking multiple panels, follow the included instructions for safe electrical connection. Do not exceed the rated connection capacity specified in the user manual.
- Actual power consumption is 175W. Verify that your outlet and circuit are rated for this load before first use.
- This device is intended for general wellness use only. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any condition.
- Consult a qualified healthcare provider before use if you have photosensitivity, are taking photosensitizing medications, have a history of skin cancer, or have any other relevant medical condition.
- Start with shorter sessions and increase duration gradually based on your comfort and tolerance.
- Keep out of reach of children. Adult supervision is required during all sessions.
- Do not use while sleeping or unattended.
Frequently Asked Questions
What are the four wavelengths, and can I use them separately?
This panel emits 630nm and 660nm in the visible red range, and 810nm and 850nm in the near infrared (NIR) range. The red (630nm, 660nm) and infrared (810nm, 850nm) channels can be activated independently or simultaneously using the on-device LCD control panel.
What does "linkable" mean, and how does it work?
The linkable design allows two or more EXESAS panels of this model to be connected together electrically. This expands the total coverage area and combined light output without purchasing a single larger panel. It also allows you to start with one panel and add more over time. Refer to the included user manual for connection instructions and the maximum number of panels that can be linked safely.
What is the difference between the 600W power class and the 175W actual consumption?
The 600W power class reflects the combined rated output of all 120 LEDs at 5W each (120 × 5W = 600W). This is a measure of the panel’s light output capacity. Actual power consumption — the electricity drawn from your outlet during operation — is 175W. Use the 175W figure when assessing your outlet and circuit requirements.
What mounting options are available?
The panel has rear mounting holes that allow it to be attached vertically or horizontally to a compatible TV stand. The package also includes a door mount and an adjustable hanging kit for alternative placement configurations. No additional hardware is required for any of these three mounting options.
What does "dual-chip" mean, and why does it matter?
Dual-chip means each LED contains two separate light-emitting chips rather than one. The 42mil chip size used here is larger than the 35–38mil single-chip LEDs found in many competing panels, contributing to higher irradiance output per LED. The dual-chip design also means each LED emits across two wavelengths simultaneously.
Is protective eyewear included?
Yes. Protective eyewear is included in the package. We strongly recommend wearing it during all sessions. Near infrared wavelengths (810nm, 850nm) are largely invisible to the naked eye, meaning you may not instinctively look away even when those channels are active.
Does this panel require a dedicated circuit?
The panel draws 175W of actual power during operation, which is within the range of a standard household outlet. However, if you plan to link multiple panels together, the combined power draw will increase accordingly. Verify that your outlet and circuit can support the total load before connecting multiple units.
What does the warranty cover?
The EXESAS panel includes a 2-year warranty covering defects in materials and workmanship. If you experience any issues with the product, contact EXESAS directly. Retain your proof of purchase for warranty service.
The EXESAS 120 LED panel is a well-specified mid-size red light therapy panel with four wavelengths, dual-chip 42mil LEDs, Meanwell drivers, over 198mW/cm² irradiance, no EMF, and a linkable design that allows you to expand coverage over time. At 175W actual consumption and 15 lbs, it’s a practical option for home use with flexible mounting and a 2-year warranty included.
This product is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Consult a qualified healthcare provider before use, especially if you have a medical condition, are pregnant, are taking photosensitizing medications, or have photosensitive skin. Do not look directly into the LED panels during operation.