The EXESAS 800 LED full-body red light therapy panel is the large-format version of the EXESAS lineup, measuring 65" × 19" × 2.6" and delivering four wavelengths — 630nm, 660nm, 810nm, and 850nm — through 800 dual-chip 42mil LEDs at 5W each. The panel’s power class is rated at 4000W with an actual power consumption of 1000W, and irradiance is rated at over 198mW/cm² with no EMF output. Red and infrared channels can be operated independently or simultaneously. The package includes a remote control, protective eyewear, a base stand, a built-in timer, an LCD control panel, and integrated cooling fans. A 2-year warranty and a rated LED lifespan of 100,000 hours are included.
Why Customers Choose This Product
- 800 dual-chip 42mil LEDs at 5W each — 4000W power class, 1000W actual consumption
- Four wavelengths: 630nm, 660nm, 810nm, and 850nm
- Red and infrared channels operable independently or simultaneously
- High irradiance: over 198mW/cm²
- No EMF output
- 30° beam angle, no flicker
- Meanwell LED drivers — used in professional-grade medical equipment
- 65" full-body panel length for standing whole-body sessions
- Remote control included for hands-free session management
- Built-in timer, LCD control panel, and integrated cooling fans
- Protective eyewear and base stand included
- Rated LED lifespan: 100,000 hours
- 2-year warranty
Product Highlights
Four Wavelengths: 630nm, 660nm, 810nm & 850nm
This panel emits four distinct wavelengths across two spectral ranges. The 630nm and 660nm outputs are in the visible red range; the 810nm and 850nm outputs are in the near infrared (NIR) range. Red and infrared channels can be activated independently or together, giving you control over which wavelengths are active during each session.
800 Dual-Chip 42mil LEDs
Each of the 800 LEDs uses a dual-chip 42mil configuration at 5W per LED. The 42mil chip size is larger than the 35–38mil single-chip LEDs used in many competing panels, contributing to the panel’s high irradiance output. The dual-chip design means each LED emits two wavelengths simultaneously.
4000W Power Class / 1000W Actual Consumption
The panel’s power class rating of 4000W reflects the combined rated output of all 800 LEDs at 5W each. Actual power consumption during operation is 1000W. This distinction is important for understanding both the panel’s light output capacity and its electrical load requirements.
Meanwell LED Drivers
Meanwell drivers are used in professional-grade medical equipment and are specified here for consistent, stable power delivery to the LEDs. This is a notable component upgrade compared to unbranded drivers used in many lower-cost panels.
High Irradiance: Over 198mW/cm², No EMF
The panel is rated at over 198mW/cm² irradiance with no EMF output during operation. Higher irradiance allows for more light energy delivery per unit of time at a given distance from the panel.
65" Full-Body Panel
At 65 inches tall, the panel is sized for full-body standing sessions without repositioning. The 19-inch width provides broad lateral coverage across the treatment area during each session.
Remote Control & Built-In Controls
A remote control is included for hands-free session management from a distance. The panel also features a built-in timer and LCD control panel for direct on-device operation without the remote.
Integrated Cooling Fans & 100,000-Hour LED Lifespan
Built-in cooling fans manage heat dissipation during operation to maintain consistent performance. The LEDs are rated for a 100,000-hour lifespan, indicating long-term operational durability under regular use.
Specifications
| Brand | EXESAS |
|---|---|
| LED Count | 800 Dual-Chip LEDs |
| LED Chip Size | 42mil Dual-Chip |
| Power per LED | 5W |
| Power Class | 4000W |
| Actual Power Consumption | 1000W |
| Wavelengths | 630nm, 660nm (Red) + 810nm, 850nm (Near Infrared) |
| Channel Control | Red and Infrared Independently or Simultaneously |
| Irradiance | Over 198mW/cm² |
| Beam Angle | 30° |
| EMF | No EMF |
| Flicker | No Flicker |
| LED Drivers | Meanwell (Professional-Grade) |
| LED Lifespan | 100,000 Hours |
| Controls | Built-In Timer + LCD Control Panel + Remote Control |
| Cooling | Integrated Cooling Fans |
| Panel Dimensions | 65" × 19" × 2.6" |
| Device Weight | Approx. 77 lbs |
| HS Code | 854370 |
| Included Accessories | Remote Control, Protective Eyewear, Base Stand, User Manual |
| Warranty | 2 Years |
| UPC | 197644058334 |
Ideal For
- Full-body standing red and near infrared light therapy sessions at home
- Users who want four wavelengths (630nm, 660nm, 810nm, 850nm) with independent channel control
- Those who prioritize high irradiance output and verified no-EMF operation
- Home wellness setups where a large-format, full-height panel is the primary light therapy device
- Users who want remote control operation alongside built-in on-device controls
Important Information
- Do not look directly into the LED panels during operation. Protective eyewear is included in the package and should be worn during all sessions. The 810nm and 850nm near infrared wavelengths are largely invisible to the naked eye.
- This panel weighs approximately 77 lbs. At least two adults are recommended for moving and positioning the unit. Ensure the base stand is fully secured and stable before each session.
- Actual power consumption is 1000W. Verify that your outlet and circuit are rated for this load before first use. A dedicated circuit may be required depending on your home’s electrical configuration.
- Confirm your space has adequate floor area and ceiling clearance for the 65" panel in its intended operating position before ordering.
- This device is intended for general wellness use only. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any condition.
- Consult a qualified healthcare provider before use if you have photosensitivity, are taking photosensitizing medications, have a history of skin cancer, or have any other relevant medical condition.
- Start with shorter sessions and increase duration gradually based on your comfort and tolerance.
- Keep out of reach of children. Adult supervision is required during all sessions.
- Do not use while sleeping or unattended.
Frequently Asked Questions
What are the four wavelengths, and what is the difference between them?
This panel emits 630nm and 660nm in the visible red range, and 810nm and 850nm in the near infrared (NIR) range. Red wavelengths (630nm, 660nm) are visible and are associated with surface-level applications in photobiomodulation research. Near infrared wavelengths (810nm, 850nm) are largely invisible and are studied for their effects at greater tissue depths. The red and infrared channels can be operated independently or simultaneously.
What is the difference between the 4000W power class and the 1000W actual consumption?
The 4000W power class rating reflects the combined rated output of all 800 LEDs at 5W each (800 × 5W = 4000W). This is a measure of the panel’s light output capacity. Actual power consumption — the electricity drawn from your outlet during operation — is 1000W. When planning your electrical setup, use the 1000W actual consumption figure to assess circuit requirements.
Can I use the red and infrared channels separately?
Yes. The red (630nm, 660nm) and infrared (810nm, 850nm) channels can be activated independently or simultaneously. This allows you to select which wavelength range is active during each session using the remote control or the on-device LCD panel.
What does "dual-chip" mean on this panel?
Dual-chip means each LED contains two separate light-emitting chips. On this panel, the chips emit different wavelengths within the red or NIR range. The 42mil chip size used here is larger than the 35–38mil single-chip LEDs found in many competing panels, contributing to higher irradiance output per LED.
What outlet does this panel require?
The panel draws 1000W of actual power during operation. Verify that your outlet and circuit are rated for this load before first use. Depending on your home’s electrical configuration, a dedicated circuit may be required. Consult a qualified electrician if you are unsure about your circuit capacity.
Is protective eyewear included?
Yes. Protective eyewear is included in the package. We strongly recommend wearing it during all sessions. Near infrared wavelengths (810nm, 850nm) are largely invisible to the naked eye, meaning you may not instinctively look away even when those channels are active.
How long do the LEDs last?
The LEDs are rated for a 100,000-hour lifespan. At one hour of use per day, this equates to approximately 274 years of rated operational life. In practice, actual lifespan will depend on usage patterns, operating conditions, and maintenance.
What does the warranty cover?
The EXESAS panel includes a 2-year warranty covering defects in materials and workmanship. If you experience any issues with the product, contact EXESAS directly. Retain your proof of purchase for warranty service.
The EXESAS 800 LED panel is a large-format, four-wavelength red light therapy panel built with verifiable component specifications — dual-chip 42mil LEDs, Meanwell drivers, over 198mW/cm² irradiance, no EMF, and a 100,000-hour LED lifespan — backed by a 2-year warranty. If you want a full-height 65" panel with independent red and infrared channel control and remote operation, it’s a well-specified option for a dedicated home wellness setup.
This product is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Consult a qualified healthcare provider before use, especially if you have a medical condition, are pregnant, are taking photosensitizing medications, or have photosensitive skin. Do not look directly into the LED panels during operation.