The Harvia Cilindro PC80E is an 8KW floor-standing electric sauna heater designed for medium-sized home saunas. Its full stainless-steel cylindrical body holds up to 200 lbs of sauna stones, delivering consistent, even heat throughout rooms ranging from 170 to 425 cubic feet. The partially open front allows water to be splashed directly onto the stones from the top or side, supporting a traditional Finnish sauna experience. UL listed and made in Finland, the PC80E is controlled exclusively via Harvia’s digital Xenio system and is compatible with WiFi-enabled control units for remote scheduling and temperature management.
Why Customers Choose This Heater
- Large 200 lb stone capacity for rich, consistent heat distribution
- Full stainless-steel cylindrical construction — durable and corrosion-resistant
- Partially open front design allows water to be splashed directly onto stones
- Compact floor-standing footprint suitable for corner or wall-side placement
- Digital-only control via Harvia Xenio system — precise temperature and timer management
- UL listed for safety compliance in North American installations
- Made in Finland by Harvia, a well-established sauna heater manufacturer
Product Highlights
Cylindrical Stainless-Steel Body
The Cilindro PC80E features a full stainless-steel cylindrical enclosure with centrally positioned heating elements. This design promotes even heat distribution around the stone mass and gives the heater a clean, modern appearance suited to finished sauna interiors.
200 lb Stone Capacity
The heater accommodates up to 200 lbs of sauna stones (sold separately), providing a substantial thermal mass for sustained, consistent heat. The large stone load also supports traditional löyly — the steam produced when water is poured over the stones.
Partially Open Front for Water Access
The front of the heater is partially open, allowing bathers to pour water onto the stones from the top or side without removing any panels. This is a standard feature of traditional Finnish sauna heaters and is built into the Cilindro design.
Digital Control via Harvia Xenio System
The PC80E is compatible exclusively with Harvia’s digital Xenio control system. The required control components are the CX45 control unit, FX402 contactors, and F-2T relay box. Manual control is not supported for this model. WiFi-enabled Xenio control units are available separately for remote operation via smartphone.
Floor-Standing Installation
The PC80E is designed for floor placement and can be installed against a wall or in a corner. Its compact 15½” × 15” footprint makes it practical for standard sauna room layouts without requiring significant floor space.
UL Listed — Made in Finland
The Cilindro PC80E is UL listed for safety compliance and manufactured in Finland by Harvia, a company with decades of experience producing sauna equipment for residential and commercial use.
Specifications
| Model | Harvia Cilindro PC80E |
| Power Output | 8 KW (8,000 Watts) |
| Voltage | 240V / 1-phase |
| Amperage | 33.4 A |
| Main Breaker Size | 40A |
| Wire Size | (2) #8 + Ground |
| Control Wire | (2) #14 + Ground |
| Recommended Room Volume | 170–425 cubic feet |
| Stone Capacity | 200 lbs (stones sold separately) |
| Heater Dimensions | 15½” W × 15” D × 45¼” H |
| Heater Weight | 39 lbs |
| Body Material | Full stainless steel |
| Installation Type | Floor-standing (wall-side or corner) |
| Control System | Harvia Xenio digital (CX45 + FX402 + F-2T) |
| Manual Control | Not supported |
| Certifications | UL Listed |
| Country of Manufacture | Finland |
| Barcode (EAN) | 6417659026192 |
Ideal For
- Home saunas with room volumes between 170 and 425 cubic feet
- Installations requiring a floor-standing heater in a corner or wall-side position
- Sauna builds where digital control and remote scheduling are preferred
- Owners who want a large stone capacity for traditional steam (löyly) sessions
- New sauna construction projects using the Carbon Smart™ kit or similar interior packages
Important Information
- This heater requires a dedicated 240V / 1-phase electrical circuit. Installation must be performed by a licensed electrician in compliance with all applicable local electrical codes.
- The PC80E is compatible exclusively with Harvia’s digital Xenio control system. The required components are the CX45 control unit, FX402 contactors, and F-2T relay box. Manual control is not supported.
- Sauna stones are not included and must be purchased separately. Use only stones rated for sauna use.
- Maintain the minimum clearance distances specified in the installation manual between the heater and all combustible surfaces, benches, and walls.
- Do not operate the heater without stones loaded. Operating without stones can damage the heating elements.
- This heater is intended for indoor sauna use only. Do not install in outdoor, unenclosed, or wet-room environments outside of a properly constructed sauna.
- Review the full installation manual before beginning installation. The manual is available from Finnish Sauna Builders upon request.
- This product is UL listed. Verify that your installation meets all requirements specified in the UL listing and the manufacturer’s installation documentation.
Frequently Asked Questions
What size sauna room is the PC80E designed for?
The Harvia Cilindro PC80E is rated for sauna rooms between 170 and 425 cubic feet. To calculate your room volume, multiply the interior length × width × height. If your room has non-standard features such as large glass walls or high ceilings, you may need to adjust the effective volume calculation — contact our team for sizing guidance.
What control system does the PC80E require?
The PC80E is compatible exclusively with Harvia’s digital Xenio control system. The required components are the CX45 control unit, FX402 contactors, and F-2T relay box. Manual control is not supported for this model. WiFi-enabled Xenio control units are available separately and allow remote operation via smartphone.
Are sauna stones included?
No. Sauna stones are sold separately. The heater accommodates up to 200 lbs of stones. Use only stones rated for sauna use — standard river rocks or landscaping stones are not suitable and can crack or shatter under high heat.
What electrical circuit does this heater require?
The PC80E requires a dedicated 240V / 1-phase circuit with a 40A main breaker, (2) #8 wire + ground for the heater, and (2) #14 wire + ground for the control. All electrical work must be performed by a licensed electrician in compliance with local codes.
Can the PC80E be installed in a corner?
Yes. The Cilindro PC80E is a floor-standing heater suitable for installation against a wall or in a corner. Its footprint is 15½” × 15”, making it practical for standard sauna room layouts. Always maintain the minimum clearance distances specified in the installation manual.
Is the PC80E UL listed?
Yes. The Harvia Cilindro PC80E is UL listed for safety compliance in North American installations.
Where is the Harvia Cilindro PC80E manufactured?
The Cilindro PC80E is designed and manufactured in Finland by Harvia.
Can I pour water on the stones?
Yes. The PC80E has a partially open front that allows water to be poured onto the stones from the top or side, producing steam (löyly) in the traditional Finnish sauna manner. Always follow the manufacturer’s guidelines for water use to avoid damage to the heating elements.
The Harvia Cilindro PC80E is a well-specified, UL-listed electric sauna heater for medium-sized home saunas. If you have questions about sizing, electrical requirements, or compatibility with your sauna build, contact our team before ordering — we’re here to help you get the right heater for your space.
This product is an electric sauna heater intended for use in properly constructed sauna rooms. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease or health condition. Consult a qualified healthcare provider before use if you have any medical concerns.