The RevX X-FLOW Cold Plunge Filtration System is a professional-grade, all-in-one water management solution designed specifically for cold plunges and ice baths. Combining continuous circulation, UV-C sterilization, and fine sediment filtration in a single pre-assembled unit, the X-FLOW keeps your plunge water clean and clear with minimal daily maintenance. Whether you run a single tub at home or manage multiple units in a commercial setting, this system is built to operate around the clock.
Why Customers Choose This Product
- All-in-one filtration, sterilization, and circulation in a single unit
- 200W high-flow pump with integrated heat sink to minimize heat transfer
- 18W UV-C sterilizer reduces the need for excessive chemical additives
- 20-micron pleated sediment filter captures fine debris and particulates
- Plug-and-play setup with pre-assembled 1-inch barb fittings
- IPX4-rated components suitable for indoor and outdoor use
- Designed for both residential and commercial, high-use applications
Product Highlights
High-Flow 200W Pump with Heat Sink
The 200W pump drives rapid water turnover with an approximate flow rate of 2,720+ gallons per hour. An integrated heat sink helps prevent pump-generated warmth from transferring into your cold water, allowing your chiller to operate more efficiently.
18W UV-C Sterilizer
The high-intensity 18W UV lamp targets bacteria, algae, and other microorganisms in the water as it passes through the sterilization chamber. This reduces reliance on chemical additives and helps maintain water clarity between changes.
20-Micron Pleated Sediment Filter
The 10-inch pleated cartridge filter captures fine debris, sediment, and particulate matter down to 20 microns. The pleated design provides a large surface area for efficient filtration while maintaining strong flow rates.
Plug-and-Play Setup
The X-FLOW arrives pre-assembled with durable 1-inch barb fittings, ready to connect to standard cold plunge plumbing. No specialized tools or complex installation are required to get started.
Durable and Weather-Resistant
IPX4-rated components are designed to withstand splashing and outdoor conditions, making the system suitable for both indoor and outdoor cold plunge setups.
Specifications
| Model | RevX X-FLOW |
| Brand | RevX Wellness |
| Pump | 200W high-efficiency with integrated heat sink |
| UV-C Sterilizer | 18W |
| Filter Type | 20-micron pleated cartridge, 10-inch |
| Flow Rate | Approx. 2,720+ GPH actual throughput |
| Fittings | Universal 1-inch plumbing barb connectors |
| Weather Rating | IPX4 (splash-resistant) |
| Weight | 65 lbs |
| SKU | RXW-0536 |
| Setup | Pre-assembled, plug and play |
| Filter Replacement | Recommended every 2 to 4 weeks based on usage |
Ideal For
- Home cold plunge and ice bath setups that need consistent water maintenance
- Commercial and high-use environments such as gyms, spas, and wellness centers
- Users who want to reduce the frequency of full water changes
- Anyone looking to minimize chemical additives in their cold plunge water
- Outdoor and indoor cold plunge configurations requiring splash-resistant components
Important Information
- Always disconnect power before performing maintenance or replacing the filter cartridge.
- Replace the filter cartridge every 2 to 4 weeks depending on usage frequency and water conditions.
- Ensure all plumbing connections are secure before operating the pump.
- Do not operate the pump dry; ensure the unit is fully primed and connected to water before powering on.
- The UV-C lamp should be replaced according to manufacturer guidelines to maintain sterilization effectiveness.
- A plumbing kit for stacking the X-FLOW on top of RevX Chillers is in development and is expected to be available in late July or early August 2026.
- Consult the product manual for full installation and safety instructions.
Frequently Asked Questions
What does the RevX X-FLOW filtration system include?
The X-FLOW includes a 200W high-flow water pump with integrated heat sink, an 18W UV-C sterilizer, and a 20-micron pleated sediment filter cartridge, all in a single pre-assembled unit with 1-inch barb fittings.
How often should I replace the filter cartridge?
Filter cartridge replacement is recommended every 2 to 4 weeks, depending on how frequently the cold plunge is used and the water conditions in your area.
Is the X-FLOW suitable for outdoor use?
Yes. The system features IPX4-rated components that are designed to withstand splashing, making it suitable for both indoor and outdoor cold plunge setups.
How difficult is the installation?
The X-FLOW is designed for plug-and-play setup. It arrives pre-assembled with 1-inch barb fittings that connect to standard cold plunge plumbing. No specialized tools are required.
Can the X-FLOW be used with RevX Chillers?
A plumbing kit that allows the X-FLOW to be stacked on top of RevX Chillers is currently in development and is expected to be available in late July or early August 2026.
What is the flow rate of the X-FLOW?
The system provides an approximate actual throughput of 2,720+ gallons per hour, driven by the 200W high-efficiency pump.
If you are looking for a reliable, low-maintenance way to keep your cold plunge water clean and clear, the RevX X-FLOW Filtration System offers a complete solution in one pre-assembled unit. Add it to your cart today and spend less time maintaining your water and more time enjoying your plunge.
This product is not intended to diagnose, treat, cure, or prevent any disease. Consult a healthcare professional before beginning any cold therapy or wellness routine.